BA-SB-DTX10-V1

SOQPSK PCM/FM TRANSMITTER

SPECIFICATIONS:


Frequency:

2185MHz ÷ 2400MHz ( Other ranges available )
Frequency Steps:

100KHz
Frequency Stability ± 5 ppm
Max Power Output: 10W min
Power Step resolution: 500mW in 1dB Typical Steps ( Accuracy ±0.5dB)
Output Impedance: 50 Ohm ,VSWR 2:1 max
Bit Rate: 1 ÷ 25MBPS
Modulations Possible PCM/FM , SOQPSK
Supply Voltage: 14 – 36 Vdc ( Reverse voltage protection)
Current consumption: 50W max Stby mode available.
Temperature Accuracy: +/-2 deg Cel
Temperature Sensor: 0.5 – 3V .
FWD power Accuracy +/-1 dB



ENVIRONMENTAL:


Temperature:

-35° ÷ +80°C
Non Operating: -40° ÷ +90°C
Vibration:

Random, 12g from 20 to 2000Hz ( 3 axis)
Shock: 100g, 11 ms , ½ sine. ( 3 axis)
Acceleration: 100g, 3 axis
Altitude: Unlimited



MECHANICAL:


Size: 76 X 51 X 19mm (excluding connectors)
Connectors:

RF –SMA FEMALE ,
Video, dc,- MDM 15 pin
1. Mod in RS422(+)
2. Mod in RS422 (-)
3. GND
4. Supply returned/GND.
5. Supply voltage (14-35V)
6. Clock in RS422(+)
7. Clock in RS422(-)
8. GND.
9. Supply voltage (14-35V)
10. On/off (NC – ON , Short, – OFF)
11. Hi/Low Power output ( Short, NC – Hi , TTL* Hi – Low **)
12. RS485(+) – CONTROL
13. RS485(-) – CONTROL
14. TEMPERATURE MONITOR
15. FWD POWER MONITOR

** Low Power Can be set by user Control .
Name plate ( On top panel) :

BA Logo, Model #, Serial number, Date of Production (WW, Year).



OTHER:


Replace ability: Each unit can be replaced with another no need of calibration.
Documents:

Each unit supplied with C.O.C and ATR.



MECHANICAL DRAWING:


tunable via manual trimmer
0.7MHz  3.5MHz @ 1Vrms ( 2.8Vptp)