BA-SB-TX10-V2

 

SPECIFICATIONS:


Frequency:

2200MHz ÷ 2300MHz ( 8 selectable frequencies in same device)
Frequency Stability ± 2.5 ppm
Power Output: 10W min
Output Impedance: 50 Ohm ,VSWR 2:1 max
Deviation: tunable via manual trimmer 0.7MHz ÷ 3.5MHz @ 1Vrms ( 2.8Vptp)
Frequency Response: Selectable Filter, Up to 10MBPS.
Video Input Impendance: 10K Ohm
Supply Voltage: 13 – 36 Vdc ( Reverse voltage protection)
Current consumption: 34W ( 30% efficiency), Stby mode available.



ENVIRONMENTAL:


Temperature: -35° ÷ +80°C, Non Operating: -40° ÷ +90°C
Vibration: Random, 12g from 20 to 2000Hz ( 3 axis)
Shock: 100g, 11 ms , ½ sine. ( 3 axis)
Altitude: Unlimited
Humidity: 90%



MECHANICAL:


Size: 76 X 51 X 19mm
Weight: 155gr
Connectors:

RF –SMA FEMALE ,

Video, dc,- MDM 15 pin

  1. Mod in TTL or RS422 (+)
  2. Mod in RS422 ( -) or contact to pin 3 ref 2.5V ( used in TTL mode)
  3. ref 2.5V
  4. Supply returned/ GND
  5. Supply voltage
  6. Output mod after filter ( contact to pin 7 or open)
  7. Input mod analog ( contact to pin 6 or external signal)
  8. GND
  9. Power HIGH/LOW ( N.C, GND- HIGH, 5V-LOW ( 20dBm max)
  10. Internal Modulation Data (SHORT with PIN 11 for normal operation)
  11. Shaping Filter input (SHORT with PIN 10 for normal operation)
  12. Frequency Control 1 ( Open/Short)
  13. Frequency Control 2 ( Open/Short)
  14. Frequency Control 3 ( Open/Short)- NOT USED
  15. GND


Name plate ( On top panel) : BA Logo, Model #, Serial number, Date of Production ( WW, Year).



OTHER:


Replace ability: Each unit can be replaced with another no need of calibration.
Documents: Each unit supplied with C.O.C and ATR.



MECHANICAL DRAWING: